METAL
FALSE CEILING SYSTEM |
200-F |
Sonex 200-F system has a unique tounge & groove inter locking
arrangement which make this system very suitable for rigid applications
. it has a neat & flat look. Its interlocking property makes
it the most sought – after exterior ceiling system, extensively
used in petrol pump & other canopies.
|
Technical Specification |
Panel:
200 mm wide X 17 mm deep roll formed out of 0.6 mm thick Aluminium
or 0.6/0.5 mm thick Steel.
Carrier:
34.5 mm wide X 48 mm deep made out of 0.9 mm thick Aluminium or 0.6
mm thick Steel, coated on both sides, to hold panels in module of
200 mm. Carriers to be spaced at 1.7 mtrs c/c without insulation &1.5
mtrs c/c with insulation.
Suspension:
Interior:
Suspension by means of 4 mm dia, galvanised steel wire rod hanger and spring
steel suspension clip fixed to roof by ‘J' hooks and nylon inserts. Suspension
to be spaced at 1.5 mtr c/c without insulation & 1.3 mtr c/c with insulation.
Exterior :
Suspension by mean of Gl suspension angle and suspension clit at
desired c/c spacing.
Base Material Options:
Sonex 200-F type false ceiling is available in both Aluminium and
Steel with any desired alloy / grade.
Paint Coating Options:
Sonex 200-F is available in
:
(a) Powder Coating : with 50 micron polyester powder paint on exposed
side.
(b) Coil Coating : with 20 microns coating on
exposed side & 5 micron on rear side.
...With excellent surface finish.
|
Technical Specification
