Home
 
 
 
 

 METAL
FALSE CEILING SYSTEM

75C/150C


Sonex 150-C system combines the flat look of 150-F & functional utility of 84-C. This flexible system offers smooth looks, alongwith, high utility value. Very suitable for maintenance prone areas.

Technical Specification

Panel:
150 mm wide X 15 mm deep roll formed out of 0.5 mm thick Aluminium or Steel. 150C panels are a available with or without perforations.

Carrier:
32 mm wide, 39 mm deep made out of 0.9 mm thick Aluminium 0.6 mm thick Steel, coated on both sides to hold panels in a module of 150 mm. Carrier to be spaced at 1.5 mtr c/c without insulation & 1.3 mtr c/c with insulation.

Suspension:
Interior:
Suspension by means of 4 mm dia, galvanised steel wire rod hanger and spring steel suspension clip fixed to roof by ‘J' hooks and nylon inserts. Suspension to be spaced at 1.5 mtr c/c without insulation & 1.3 mtr c/c with insulation.
Exterior :
Suspension by mean of Gl suspension angle and suspension clit at desired c/c spacing.

Base Material Options:
Sonex 150-C type false ceiling is available in both Aluminium and Steel with any desired alloy / grade.

Paint Coating Options:
Sonex 150-C is available in :
(a) Powder Coating : with 50 micron polyester powder paint on exposed side.

(b) Coil Coating : with 20 microns coating on exposed side & 5 micron on rear side.
...With excellent surface finish.

84/184C Systems
84-R/84-RF
150-F
200-F